|
COMMERCIAL WALL EXHAUST FAN
HIGH QUALITY – (YET VERY AFFORDABLE)
SINGLE SPEED, 2-SPEED, OR VARIABLE SPEED
(For Polyethylene Flush Mounted Models)
New Model PFM2400
Size 24” – 7200 CFM |
Model PFM0900 – PFM20HC
Size 9” through 20”
1091 to 4966 CFM |
|
Polyethylene Flush Mount Exhaust Fans
 
(Prices start as low as $499.00 + Shipping)
Shipped COMPLETELY ASSEMBLED
READY FOR INSTALLATION!
CARL J. BUSH COMPANY
(SINCE 1929)
(248) 276-8400
PFM0900-1 |
9” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/6HP |
1091 CFM |
PFM1200-1 |
12” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/3HP |
1604 CFM |
PFM1200-2 |
12” Direct Drive Flush Mount Style, 2-Speed Motor, 1/3HP |
1604 CFM
1075 CFM |
PFM1600-1 |
16” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/3HP |
3085 CFM |
PFM1600-2 |
16” Direct Drive Flush Mount Style, 2-Speed Motor, 1/3HP |
3088 CFM
2198 CFM |
PFM2000-1 |
20” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/3HP |
3533 CFM |
PFM2000-2 |
20” Direct Drive Flush Mount Style, 2-Speed Motor, 1/3HP |
3540 CFM
2591 CFM |
PFM20HC-1
Single Phase |
20” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/2HP |
4966 CFM |
PFM20HC-3
Three Phase |
20” Direct Drive Flush Mount Style, 1-Speed Exhaust Fan, 1/2HP |
4966 CFM |
PFM2400-1A
Single Phase |
24” Direct Drive Flush Mount Style, Variable Speed Exhaust Fan, 1/2HP |
7200 CFM |
PFM2400-3A
Three Phase |
24” Direct Drive Flush Mount Style, 1-Speed Exhaust Fan, 1/2HP |
7200 CFM |
(Rough-In Opening Details)
-Model PFM0900-1 (13-3/4” Wide X 14-1/2” High)
-Model PFM1200-1&2 (15-3/4” Wide X 16-3/4” High)
-Model PFM1600-1&2 (19-1/2” Wide X 20-1/2” High)
-Model PFM2000-1&2 (23-1/2” Wide X 24-3/4” High)
-Model PFM20HC-1&3 (23-1/2” Wide X 24-3/4” High)
-Model PFM2400-1A&3A (29” Wide X 29-1/2” High)
(All units are complete with Heavy Duty Polyethylene Housings, Automatic Shutters (Poly or Aluminum), Totally Enclosed Motors, and Powder-Coated Fan Guard). Shipped Completely Assembled – ready to install in wall.
(For use with Variable Speed Polyethylene Exhaust Fans)
Manual Variable Speed Controls, 115/230 volt
MODEL: MSC-400
Additional Details
Our manual controllers can be used on most of our single speed fans to adjust air flow from 20% to 100% of fan output capacity. They also have the ability to turn the fan completely off. Supplied in water tight electrical enclosure with approved connectors.
115/230 VAC, 12.5 FLA. Use MSC-400 on variable speed fans.
(For use with our 2-Speed Polyethylene Exhaust Fans)
Two-Speed Fan Switch MODEL: FS-20
Additional Details
A manual switch used to control the operation of any two-speed fan motor. The three position switch allows operator to set the fan speed in the HIGH, LOW, or OFF position. Furnished in a moisture-proof enclosure with code approved connectors. 15 VAC, 15amp
 |
36", 42" and 48"
Fiberglass Flush Mount
Exhaust Fans.
Housing is constructed of molded fiberglass.
Units shipped COMPLETELY ASSEMBLED
ready or installation. Flush mount design saves
space within your facility. Aluminum Shutter
included. Propellers available in Galvanized
or Stainless Steel. Direct Drive or Belt Drive
operation.
PRICES START AT $995.00 |
|
Fiberglass Flush Mount Exhaust Fans at Industrial Facility
Model # |
Description |
Motor Specs |
Performance |
FMN3600-1G |
36" Fiberglass Belt Drive 1-spd. |
1/2hp, 115/230 1-Ph |
9600 CFM |
FMN3600-2G |
36" Fiberglass Belt Drive 2-spd. |
1/2hp, 230v 1-Ph |
9600/6344 CFM |
FMN3606-1G |
36" Fiberglass Belt Drive 1-spd. |
1/2hp, 115/230 1-Ph |
11,012 CFM |
FMN3606-2G |
36" Fiberglass Belt Drive 2-spd. |
1/2hp, 230v 1-Ph |
11012/7277 CFM |
FMN3690-1G |
36" Fiberglass Direct Drive |
1/2hp, 115/230 1-Ph |
9610 CFM |
FMN3690-1S |
36" Fibgls w/ Stainless Steel Prop |
1/2hp, 115/230 1-Ph |
9780 CFM |
FMN4200-1G |
42" Fiberglass Belt Drive 1-spd. |
3/4hp, 115/230 1-Ph |
14812 CFM |
FMN4200-2G |
42" Fiberglass Belt Drive 2-spd. |
3/4hp, 115/230 1-Ph |
14812/9789 CFM |
FMN4206-1G |
42" Fiberglass Belt Drive 1-spd. |
3/4hp, 115/230 1-Ph |
15652 CFM |
FMN4206-2G |
42" Fiberglass Belt Drive 2-spd. |
3/4hp, 115/230 1-Ph |
15652/10344 CFM |
FMN4800-1G |
48" Fiberglass Belt Drive 1-spd. |
1hp, 115/230 1-Ph |
18614 CFM |
FMN4800-1S |
48" Fibgls w/ Stainless Steel Prop |
1hp, 115/230 1-Ph |
18614 CFM |
FMN4800-2G |
48" Fiberglass Belt Drive 2-spd. |
1hp, 115/230 1-Ph |
17384/11366 CFM |
FMN4800-2S |
48" Fibgls w/ Stainless Steel Prop |
1hp, 115/230 1-Ph |
16027/10583 CFM |
FMN4806-1G |
48" Fiberglass Belt Drive 1-spd. |
1hp, 115/230 1-Ph |
22,365 CFM |
FMN4806-2G |
48" Fiberglass Belt Drive 2-spd. |
1hp, 115/230 1-Ph |
20570/13419 CFM |
ROUGH IN OPENINGS: |
36" Direct Drive Opening & 36" Belt Drive Opening |
42" Opening |
48" Opening |
43-1/2"W x 43-3/4" H |
Re-designed |
55-3/4"W x 56-1/4"H |
Complete Drawing and Specification Sheet on each fan model is available. Please call for details.
All models usually shipped from our factory in 3 Business Days.
Call for details and current/BEST pricing!
CARL J. BUSH COMPANY – SINCE 1929
PHONE: (248) 276-8400
FAX: (248) 276-8401
|
