Carl J. Bush Company Since 1929 USA  
Industrial Fan Propellers

 

Home
Contact Us
Commercial Wall Fans
Filtered Explosion Proof Wall Exhause Fans
Stainless Steel Roof Exhaust Fans
Filtered Roof Ventilator Fans
Explosion Proof Fans
Odor Fume Control Fans
Fans & Propellers
Centrifugal Blowers
Mancooling Fans
Tubeaxial Duct Fans
Industrial Roof Exhaust Fans
Wall Fans
Stainless Steel Wall Fans

 

Heavy-Duty
Industrial Fan Propellers and Fan Blades

(for replacement)
Sizes 12” to 120”

(Available with "Straight Bore" or with "Taperlock Bushing")

Heavy Duty Industrial Fan Heavy Duty Industrial Fan Cast Aluminum Fan
Adjustable Pitch Type Cast Aluminum with Taperlock Bushing.
(Sizes 12" to 55")


Fabricated Steel with either Straight-Bore, or Taperlock Bushing.
Also available in 304 and 316 Stainless Steel
or Semi-Aluminum Construction.
(Sizes 12" to 120")
SOLID, ONE-PIECE Cast Aluminum with Straight Bore Only and Set Screws (Sizes 12" to 60")

For use on “INDUSTRIAL FANS AND COOLING TOWER FANS”
-Belt Driven Fans
-Direct Driven Fan
s

-Propellers can be “trimmed” to your exact specifications.

PROPELLER CHECK-LIST

(What we need from you for proper propeller selection)

For DIRECT DRIVEN Fans:

-Exact Tip to Tip Diameter (for propeller to fit into your existing fan housing)

-Number of Blades on Old Propeller being replaced

-Motor Horsepower

-Motor RPM

-Bore Diameter (Diameter of Motor Shaft)

-Rotation (Clockwise or Counter-Clockwise). Rotation is the direction the propeller is turning while BLOWING AT YOU.

-What type of fan style ? (Roof Exhaust, Wall Exhaust, Tube Axial Duct Fan, Circulation Fan, etc.)

-Do you have a specific rated capacity you require for the replacement propeller ? (CFM – Cubic Feet per Minute Airflow), and Static Pressure (inches of water column). This would be helpful if available if the fan is connected to existing ductwork.

For BELT DRIVEN Fans:

-Exact Tip to Tip Diameter (for propeller to fit into your existing fan housing)

-Number of Blades on Old Propeller being replaced

-Motor Horsepower

-Motor RPM

-Bore Diameter (Diameter of Fan Shaft)

-Propeller RPM (or Fan Speed). If you don’t know this, please provide the diameter of the Motor Pulley and Fan Pulley, and we can set up a mathematical proportion to determine the RPM of the old fan propeller.

-Motor Pulley Diameter

-Fan Pulley Diameter

-Rotation (Clockwise or Counter-Clockwise). Rotation is the direction the propeller is turning while BLOWING AT YOU.

-What type of fan style? (Roof Exhaust, Wall Exhaust, Tube Axial Duct Fan, Circulation Fan, etc.)

-Do you have a specific rated capacity you require for the replacement propeller ? (CFM – Cubic Feet per Minute Airflow), and Static Pressure (inches of water column). This would be helpful if available if the fan is connected to existing ductwork.

(248) 276-8400
CARL J. BUSH COMPANY

 

"WE DO NOT CARRY PROPELLERS FOR USE IN RESIDENTIAL FANS OR CIRCULATION
FANS WITH STAMPING BLADES. OUR PROPELLERS ARE INTENDED FOR HEAVY
DUTY INDUSTRIAL FANS ONLY"

 

Type X Fan Blades

Type X Fan Blades

The TYPE X propeller is the workhorse of the industrial ventilation industry. This Fan is designed to operate within a wide power horsepower range with substantial air delivery.

  • Industrial Duty
  • Heavy Gauge Construction
  • Operates Over a Wide Horsepower Range
 

X-24 thru x-48 also available in reversible style.

APPLICATIONS:
Rooftop Ventilators
Cooling Towers
Refrigeration Units
Portable Blowers

   
 

Type A Fan Blades

Type A Fan Blades

The TYPE A propeller is the fastest growing fan design for the general ventilation industry today. The fan's ability to produce large volumes of air at low speeds lowers its noise output.

  • Ultra Quiet
  • Medium Duty
  • Large Volume of Air at Low Speeds

APPLICATIONS:
General Ventilation Fans
Agricultural Fans
Poultry Fans
Air Turn-Over Units

   
 

Type Y Fan Blades

Type Y Fan Blades

The TYPE Y propeller has earned its place in the market for its quality and stable air flow characteristics. This fan is designed to operate against medium static pressures and produce the same airflow at lower speeds.

  • Industrial Duty
  • Greater Efficiency
  • Lower Noise Characteristics

APPLICATIONS:
Cooling Towers
Tube and Vane Axial Fans
Refrigeration Units
Heavy Duty Ventilating Fans

   
 

Type F Fan Blades

Type F Fan Blades

The TYPE F propeller is a rugged design for higher-pressure applications. This propeller has a large hub to tip ratio, which enables it to operate at higher speeds and pressures.

  • Heavy Industrial Duty
  • Designed for Static Pressure of 2-5 in.wg
  • Heavy Gauge Material
  • Twelve Blades

APPLICATIONS:
Radiator Cooling on Compressors and Diesel Engines
Large Refrigeration Units
Vane and Tube Axial Fans
Cooling Towers

   
 

Type G Fan Blades

Type G Fan Blades

The TYPE G propeller is a rugged design for higher-pressure applications than even the F style propeller. This propeller has a large hub to tip ratio, which enables it to operate at higher speeds and pressures.

  • Heavy Industrial Duty
  • Designed for Static Pressure of 2-5 in.wg
  • Heavy Gauge Material
  • Sixteen Blades

APPLICATIONS:
Radiator Cooling on Compressors and Diesel Engines
Large Refrigeration Units
Vane and Tube Axial Fans
Cooling Towers

   

"Consult with us for pricing and lead times"
(248) 276-8400
CARL J. BUSH COMPANY

 

 

[Home] [Contact Us] [Comercial Wall Fans] [Filtered XP Wall Fans] [Stainless Steel Roof Exhaust Fans] [Filtered Roof Ventilator Fans] [Explosion Proof Fans] [Odor Fume Control Fans] [Fans & Propellers] [Centrifugal Blowers] [Man Coolers] [Tubeaxial Duct Fans] [Roof Exhaust Fans] [Wall Fans] [Stainless Steel Wall Fans]

Copyright © 2003-4 Carl J. Bush Company