-
Read moreQuick ViewModel DRV – Upblast Roof Exhaust Fan – Direct Drive
Sizes 18″ to 60″
– Model DRV Direct Driven Roof Exhaust Fans are used where it is acceptable to have motor directly in the air stream. Airstream temperatures not to exceed 104 Deg. F.
– Can be connected directly to ductwork
– Explosion Proof Construction availableRead moreQuick View -
Read moreQuick ViewSeries 800 and 900 – Industrial Exhaust Fans Package
Sizes 12″ to 60″
– Belt Drive or Direct Drive
– Designed for use with all wall ventilation fans to simplify mounting in block, concrete, or metal wall
– Can be used for exhaust or intake fans (with intake damper & weatherhood)
-Provides correct spacing between propeller and shutter.
– PKG includes shutter, rear guard and mounting box.
– Performance ratings as shown on our standard 800 thru 900 performance data tables.Read moreQuick View -
Read moreQuick ViewSeries 800 – Industrial Exhaust Fan – Belt Drive
Sizes 24″ to 60″
– Designed to move large volumes of ambient air at low static pressures
– Excellent for general ventilation in factories and warehouses for continuous duty applications
– Explosion Proof Construction available
– 304 or 316 Stainless Steel Construction availableRead moreQuick View -
Read moreQuick ViewSeries 900 – Industrial Exhaust Fan – Direct Drive
Sizes 12″ to 60″
– Excellent for use in higher static pressure applications in factories, warehouses and mills for fume, smoke or dust removal.
– Provides dependable performance with little maintenance.
– Explosion Proof Construction available
– 304 or 316 Stainless Steel Construction availableRead moreQuick View -
Read moreQuick ViewAll 304 or 316 Stainless Steel Tube Axial Duct Fans – Belt Driven
Sizes 12″ to 60″
– Washdown Duty available
– Designed for use in high moisture or corrosive airstreams
– Ideally suited for use on industrial parts washers for excess vapor removal
– Standard construction suitable to 225 Deg. F. and up to 375 Deg. F. with high temperature package
– Very High Quality – Industrial Grade
– MADE IN THE USA – with American Stainless SteelRead moreQuick View -
Read moreQuick ViewDF-Series – Marine Duty Black Epoxy Powder Coated (Corrosion Resistant) Tube Axial Duct Fans – Direct Drive
Sizes 12″ to 60″
– These MARINE DUTY Black Epoxy Powder Coated Steel, Direct Drive Tube axial Fans are recommended for duct applications on OCEAN GOING SHIPS, OFF-SHORE OIL RIGS, SALT WATER LOCATIONS, and in Mills, Mines, Foundries, Factories, or wherever fumes, dust, smoke or steam must be removed
– Propellers are non-sparking Cast Aluminum
– Explosion Proof Construction available
– Offer great protection in salty sea-air environments (as found on Ships and Ocean Vessels).
– Very High Quality – Industrial Grade
– MADE IN THE USARead moreQuick View -
Read moreQuick ViewDF-Series – Hot Dipped Galvanized Steel Tube Axial Duct Fans – Direct Drive
Sizes 12″ to 60″
– These HOT DIPPED GALVANIZED STEEL Direct Drive Tube axial Fans are recommended for duct applications on OCEAN GOING SHIPS, OFF-SHORE OIL RIGS, SALT WATER LOCATIONS, and in Mills, Mines, Foundries, Factories, or wherever fumes, dust, smoke or steam must be removed
– Propellers are non-sparking Cast Aluminum
– Explosion Proof Construction available
– Offer great protection in salty sea-air environments (as found on Ships and Ocean Vessels).
– SMALLER UNITS UP TO SIZE 30” USUALLY IN STOCK.Read moreQuick View -
Read moreQuick ViewBCS-Series – Tube Axial Duct Fans – Belt Driven
Sizes 12″ to 60″
– Designed for use in high moisture or contaminated airstreams
– Ideally suited for use on industrial parts washers for excess water vapor removal
– Standard construction suitable to 225 Deg. F. and up to 375 Deg. F. with high temperature packageRead moreQuick View -
Read moreQuick View
B-Series – Tube Axial Duct Fans – Belt Driven
Sizes 12″ to 42″
– The ultimate in positive elimination of smoke, fumes and vapors through duct work in PAINT BOOTHS and other hazardous locations
– Recommended for use in dry environments with temperatures less than 180 Deg. F.
– Motor OUT of the airstream
– Explosion Proof Construction availableRead moreQuick View -
Read moreQuick ViewDF-Series – Tube Axial Duct Fans – Direct Drive
Sizes 12″ to 60″
– These Direct Drive Tube axial Fans are recommended for duct applications in Mills, Mines, Foundries, Factories, or wherever fumes, dust, smoke or steam must be removed
– Propellers are non-sparking Cast Aluminum
– Explosion Proof Construction availableRead moreQuick View -
Read moreQuick ViewModel 900 Series – Stainless Steel Wall Fans – Washdown Duty Construction
Sizes 12″ to 60″
Our CJB 900 Series “SS-Model” All Stainless Steel Wall Exhaust (or Supply) air package fans are well suited for
– Corrosive Exhaust Applications
– Washdown Applications
– Applications requiring non-rusting stainless steelRead moreQuick View -
Read moreQuick ViewModel BRV-8 – Upblast Roof Exhaust Fan – Belt Drive
Sizes 24″ to 60″
– Designed for general ventilation and smoke and fume removal where lower cost and less maintenance are a priority
– Motor is directly in the airstream
– Quieter operation than Direct Drive
– Explosion Proof Construction available
– Fabricated Steel Fan Propellers StandardRead moreQuick View
HIGH QUALITY INDUSTRIAL GRADE FANS AND BLOWERS, MANUFACTURED WITH PRIDE! Get a free quote!
